b'in a blistering 7,112 mm (280") perBesides being functional, thevided the added benefit of a fin-minute feed rate. bases needed to be free of sharpished, professional aesthetic, which The finishing operation smoothededges and burrs for safety. Con- was a win-win scenario for the end out the edges and ensured a burr- touring the profiles of bases pro- customer.CTEfree finish. The finishing pass was run at 0.13 mm (0.005") feed per tooth at the same 36,000 rpm at a full 9.52 mm (0.37") axial DOC and 0.13 mm radial DOC.Plastic is a poor conductor of heat, so managing heat is key to successful speeds and feeds. The single-flute endmill provided ample clearance to minimize heat from re-cutting chips, and the machines air blast feature further aided chip evacuation.Take control of your deep hole drillingStar Cutter special design and build Small Diameter Solid Carbide Gundrills are proven to reduce costs and improve tool performance.- Coolant through diameter range down to 0.028 (0.700 mm)- Highly polished flutes & cutting edge geometries to optimize tool performance- Superior tool life results in the machining of stainless steels and titaniums- Overall lengths are designed specific to the application- Manufactured and serviced in the U.S.A.Small Diameter Pilot Toolsalso available For pricing, sizes or to request a quote, give Star SU a call or visit ourwebsite:248-474-8200 www.star-su.comJ. Saundersctemag.com/cteguide.com33ShopOps.indd 33 7/20/20 10:05 AM'