b'\x1b\x1a\x19 \x1f\x18\x1d\x17\x16 Machinists CornerDetermining cutting force is the key to the puzzle.tools, this is the depth of cut) kill in most situations, and of coursetool has a helix angle, the cutting H = chip thickness it can be improved. But it gives aforce produces a vertical force pull-J = (number of flutes)/2 relationship between workpieceing the part out of the vise and the R = tool radius tensile strength and metal removalendmill out of its holder. If you know W = horizontal width of cut rate, and its quick and easy to use. CF, you can estimate this force too. If One thing more: If your cuttingSafety pays.CTET = 40,000G = 0.125H = 0.01N = 8 about the author J = 2 Brandt Taylor is owner of Berlin, Massachusetts-based Tay-R = 0.5 lor Engineering, a machine shop and manufacturer of lathe W = 0.65 chuck jaws. He can be reached at [email protected] CF = 800 lbs. com. For more information about the chuck jaws, visit www.This has worked for me. Its over- stopjaws.com.HIGHEST PRECISION FOR MOST DEMANDING APPLICATIONSState-of-the-art and trendsetting high-tech solutions for various induriesfor over 100 years.www.agathon.comVisit us at IMTS Booth #23682314SEPTEMBER 2022MachinistCorner.indd 14 8/16/22 11:34 AM'