b'READY TO SHIP:composite routersAll images: J. SaundersThe setup is shown for a Tormach 1100 CNC mill.with luster even when cut on a small CNC machine.Recipe502wasaFusion360 adaptive roughing strategy run at 12.2 m/min. (40 sfm) and 0.033 mm/tooth (0.0013 ipt) with a 15.875 mm (0.625") axial DOC (a p ) and 0.508 mm (0.02") radial DOC (a e ). Rec-ipe 505 was a 2D contour finishing strategy run at 15.2 m/min. (50 sfm) and 0.025 mm/tooth (0.001 ipt) at the same 0.625" axial DOC to re-move the 0.02" radial stock left after roughing, imparting an excellentSome of our most popular surface finish. THE RIGHTdesigns are now in stock, Larger machine tools with more rigidity can handle higher removalTOOL ready to ship when yourates and higher surface footage.need them.ProvenCut recipe 81 was a great ex- RIGHT NOW!ample of using a Haas VF-2 and aTo request a quoteseven-flute, 12.7 mm (0.5") carbidevisit amamcotool.com endmill at 45.7 m/min. (150 sfm) toor call 800.833.2239. machine 60-HRC D-2 tool steel.ProvenCutswebsiteprovides pictures, videos and cutting infor-mation for each speed and feed800.833.2239 www.amamcotool.comrecipe.CTEctemag.com/cteguide.com17ShopOps.indd 17 3/16/20 11:25 AM'