b'AMP UPworkpiece. They then can be removed with a few light taps from a hammer. Methods Machine Tools YOURFANUC Americas Core Stitch function uses a reverse discharge process to retain slugs in the automatedslugremoval.Flaw- annealing tube, allowing the ma- MRRlessautomaticwirethreadingchine to thread while fully sub-isalsoneeded.FANUCAmer- merged, even at the maximum 20" ica Corp., Rochester Hills, Mich- Z-height.igan, addresses this with its re- Its very accurate, he said. We vampedAWF3automaticwirecan thread a 0.01" wire, for example, feed system. Raucci said the newthrough a 0.015"-dia. hole and areRun at higher feed rates threader includes an integrated airable to feed the wire through muchand take deeper depths supply that runs the length of thetaller kerfs than the previous genera-tion. Couple that with the machinesof cut thanks to the automated probing, coordinate ro- free-cutting capabilities contributors tation, remote management fea- of the Seco Double tures and extreme reliability, and it GF Machining Solutions LLC means you can load it up with a 66- Quattromill TM , Double 847-913-5300 lb. spool and come back 100 hoursOctomill TMand R220.88 www.gfms.com/us later to a pile of finished parts. face milling cutters. Makino Inc. Trust, but Verify513-573-7200 Because robust threading is im-www.makino.com portant, Ostini said GF Machin-MC Machinery Systems Inc. ing Solutions created its Thread-630-616-5920 ing-Expertandautomaticwire www.mcmachinery.com changer systems. But just as impor-tant is knowledge of wire breaks Methods Machine Tools Inc. and other process-related events. 877-668-4262 That is why the company has devel-www.methodsmachine.com oped eTracking software that con-Sodick Inc. stantly monitors and records the 888-639-2325 spark condition related to specified www.sodick.com norms, generator parameters and ctemag.com/cteguide.com31EDM.indd 31 6/14/19 4:37 PM'