b'Anything that you want to grip, you just attach it and it works with the endeffector system that you have in mind for your automated environment.Working Together you just attach it and it works withler, vice president of workholding.the end effector system that you have in mind for your automatedAutomation Locationarm and placed into the machine. environment, said Frank Baeum- Toensurelocationaccuracy One example of this is the Ro-boTrex automation system from Lang Technovation Co. in Hartland, Wis-consin. The system contains a pair of trolley carts that hold vises loaded with blanks. Loading takes place of- Electric Spindlesfline while the machine is running, explained General Manager Jon Do- E-Speedbosenski. Once filled with loaded vises, the trolley cart in the loading area is ready to be wheeled into the machining area, where it takes the place of the other cart, which is filled with vises that hold parts that have been machined. During the ma-chining process, a robot arm picks each loaded vise out of the cart and places it into the machine, then puts it back in the cart when machining of that part is finished.With this dual-cart system, he said, we can keep the automation process consistent and maximize usage time on the machines.Workholding devices can include features that make it easier for themFlange & Straight Motors/Spindles to be picked up by robot end ef-fectors. For example, devices sold20mm | 22.8mm | 25mm | 30mm | 40mmby Mate Precision Technologies in Anoka, Minnesota, have 8 mm tapped holes that can hold studs or other objects that can be grabbed by an end effector. IDEAL FOR ROBOTICS & AUTOMATIONAnything that you want to grip,Versatile, Durable, and Accurate Powerful & Lightweight to minimize robotic payload Maximum Speed: 80,000 rpmabout the author Maximum Output: 1,200WWilliam Leventon Accuracy less than 1 mis a contributing writer for CTE.www.NSKAmericaCorp.com|(847) 843-7664|Toll Free: (800) 585-4675Contact him at 609-920-3335 or [email protected]/cteguide.com23Workholding.indd 23 3/16/23 11:37 AM'