b'Air Quality Issues The Senturion dust collector for Turning reportedly protects against continued from Page 39 any type of particulate, including the mix of fine and The source capture system should becoarse particulate that turning connected to a dust collector to filter theproduces.air. If oil mists are present, the collector must be fitted with appropriate filtration for mist. If both particulate types aresystem design.present, multiple filtration stages couldUpgrading ventilation be necessary. and dust collection systems Keep the area well ventilated toprotects workers and remove remaining solid particulates andkeeps facilities compliant aerosols and carry away excess heat. Awith OSHA regulations. makeup air system may be needed toIt is best to work with a bring fresh air back into the facility. knowledgeable engineering Personal protective equipment,firm when making design such as respirators, should be used asdecisions.a last resort if engineering controls likeFor more information dust collection and ventilation cannotabout RoboVent in Sterling bring down particulate and aerosolHeights, Michigan, call 213-concentrations in the breathing zone toRoboVent 682-2164 or visit www.acceptable levels. robovent.com.Ventilation and dust collection systemslaid out by ACGIH, ASHRAE and NAFA Senior Applicationshould be designed using best practicesfor ventilation system and air filtrationEngineer Mike MeyerCelebrating 40 Years!Join us at in Booth #1121Building and Servicing Machines since 1983!rushmachinery.comBooth #112140APRIL 2023Turning.indd 40 3/16/23 1:46 PM'