b'Lang TechnovationA trolley cart with loaded vises is pushed into an area for machining.REVOLUTIONARY HMI/Controllerthat attach to the underside of a pallet by means of aHuman / Machine Interface Controls and Displays Pump Status and MORE!retention knob or pull stud of some sort, he explained.If you have a 12" pallet and your part is 8", you canM-CODE REDUCTIONonly fit one part on the pallet, he said. But if yourCreate Clamping Processes within parts are 3" or 4", you may be able to nest multipleVektek\'s Pump Controller and Reduce the Need for Costly M-Codes!parts per pallet.Zaya said increased part density per fixture is theINTEGRATES EASILY with Machine way that workholding can have its biggest impact on an@M-Codes, Robots and Other Controllers!automated system.Having a single part per fixture only makes sense when its based on part size, he said. Once you get away from size constraints, having multiple parts per fixture is where an automation system can really shine,BOOTH: 3083particularly with five-axis machines.In five-axis machining, a common occurrence citedCOME SEE US! APRIL 18\x1720THby Zaya is the need to machine four or five parts at a time. In cases like this, he said shops can use a pyramidwww.vektek.com800.992.0236fixture with four faces and possibly a fifth on top, each ctemag.com/cteguide.com27Workholding.indd 27 3/16/23 11:37 AM'