b'Pryor TechnologyThis custom on-the-fly laser marking system was designed to meet the requirements of a particular production process.Magic Markers Although users dont have to paymanufacturing operations, he said, for ink and other consumables, theand more like two to three years in laser is a big-ticket item. Landry saidsettings where production is slower.Sellers of ink-based systems reallythe cost of a laser on-the-fly marking make their money off the consum- system ranges from approximatelyProduction Considerationsablesthe ink, solvents and other$60,000 to $120,000 compared withSlowing down a line for marking things used in that process, saidroughly $10,000 to $30,000 for anmeans slowing production as well.Rick Jones, lead support engineer atink system. He added, however, thatTherefore, when integrating a Pryor Technology Inc. in Ashland, Vir- laser systems eventually make up thislaser for marking into an automated ginia. But in laser marking processes,cost difference through savings oncell, you want to make sure the extra consumables are virtually zero. ink and other consumables over time.step is not reducing the volume ca-Laser marking is a fully automatedThis could take a year in high-volumepabilities of the process, Landry process that can mark a part in asaid.fraction of a second. Trumpfs sys- One way to speed up laser mark-tems use software to calculate theabout the authoring to meet production requirements speed of a part-carrying conveyoris to opt for a higher-power laser.belt and align that with the speed ofWilliam LeventonUptoacertainpoint,thisis the laser mirrors, which are movedis a contributingscalable, Jung said. So if your mark by a pair of motors. This allows thewriter for CTE.would take one second with a 10 W system to mark parts while theyContact him atsystem, you can scale up to a 20 W 609-920-3335 are in the lasers scan field, Jungor wleventon@ system and reduce the time to half a explained. gmail.com. second.16JUNE 2021PartsMarking.indd 16 5/17/21 11:25 AM'